Southern Solution / Exterior preparation

Exterior paint prep.
A better start.

Exterior paint prep cleaning in Nashville for homeowners, painters and property managers. Remove the contamination your coating contractor needs addressed, with the cleaning scope agreed before the painting crew arrives.

Siding · Trim · Masonry · Selected wood & metal scopes

Southern Solution exterior-cleaning equipment at a Brentwood estate
Exterior-cleaning work at a Brentwood estate, from our project gallery.
Written scopeCleaning responsibilities defined
Painter coordinationPlan around the coating system
InsuredCOI available on request
Middle TennesseeHomes & commercial properties

Start with the specification

Clean is essential.
It is not the whole paint job.

Dirt, mildew, grease and chalky residue can interfere with a coating project. But washing does not make loose paint sound, repair rotten trim or establish that the surface is dry enough for the selected product.

Our exterior paint prep service defines the cleaning portion of that work. We coordinate the required scope with you or your painter, then separate cleaning, specialist residue removal and any remaining preparation instead of calling a standard wash “ready to paint.”

Choose the right level of work

Three different needs.
Three different scopes.

01 / MAINTENANCE WASH

Refresh the exterior.

For owners addressing routine growth and grime without a planned repaint. Suitable existing finishes are cleaned using a method matched to the material.

02 / PAINT PREP CLEANING

Support the coating plan.

For an upcoming paint project. We review the contamination, surface and painter’s requirements, then quote the cleaning and residue-removal work needed.

03 / SPECIALIST REMOVAL

Assess what must come off.

Heavy chalking, failed wood stain or other coatings can require more than a wash. Testing and a separate scope establish what can be removed and what remains for the painter.

Material before method

Preparation depends on
what you are painting.

Siding & exterior trim

Assess surface dirt, growth, chalking and the condition of the existing finish. Painted wood, fiber cement, vinyl and metal siding each need a compatible approach. The painter confirms whether the substrate and intended coating are suitable.

Brick, masonry & textured finishes

Identify the material and contamination before treatment. White deposits, coatings and organic staining need different decisions. Cracks, moisture concerns and failed joints may need another trade before cleaning.

Cedar, decks & stained wood

Cleaning, stripping and brightening are assessed according to the existing finish and planned result. A stain-restoration job is not automatically a paint-removal job.

Metal roofs & coated metal

Metal roof preparation has a dedicated assessment covering condition, oxidation and the planned coating work. It is quoted separately from general exterior paint prep cleaning.

Older or unknown coatings need assessment before any work that could disturb them. This service does not include lead testing, lead abatement or hazardous-coating removal.

A useful handoff for your painter

Agree on the finish line
before we start.

Share the plan

Provide the address, surface photos, existing finish, intended coating and painter’s preparation requirements.

Define the scope

Identify cleaning, test areas, specialist treatments, protection and exclusions. Agree on who handles repairs and mechanical preparation.

Clean & rinse

Complete the assessed cleaning method, protect adjacent areas and rinse as required by the products and material.

Review & release

Document the cleaned scope and remaining concerns. The painter checks drying, surface soundness and final coating-readiness requirements.

Clear responsibilities

What the cleaning quote
does—and does not—cover.

Task How it is handled
Removal of assessed dirt, growth or surface contamination Included only for the surfaces and conditions stated in our cleaning proposal
Chalking, oxidation or existing wood stain Assessed and priced separately when specialist removal is needed
Surrounding-surface and landscape protection Planned for the agreed treatment, site and access
Scraping, sanding, feathering edges and coating removal Remain with the painter or specialist unless explicitly included
Rot repair, joint repairs, caulking, priming and painting Separate trades or scopes; not part of a standard prep-cleaning quote
Final dryness and coating readiness Confirmed by the coating contractor against the selected product requirements

For homeowners

Already have a painter?

Send their preparation requirements with your photos. We can identify the cleaning work to quote so you are not booking a routine wash when the project calls for chalk removal or another specialist treatment.

Tell us whether the quote from your painter already includes washing. Defining that responsibility avoids paying twice or leaving a gap between contractors.

For painting contractors

Need the washing handled?

Send the site, surfaces, coating specification, preparation expectations and target start date. We can assess the cleaning scope and agree on access, site protection and completion documentation.

Repeat work is scoped per property. We confirm capacity and sequencing rather than promising a fixed turnaround for every exterior.

Price follows the work

What does exterior
paint prep cleaning cost?

A custom scope accounts for surface area, height, contamination, condition, protection needs and access. A sound single-story elevation is different from chalky siding above landscaping or a multi-story commercial facade.

The written quote identifies the cleaning work included and any specialist treatment. Share the painter’s schedule early: drying conditions, repairs and the coating instructions still determine when painting can begin.

We serve Nashville, Franklin, Brentwood, Belle Meade, Forest Hills, Oak Hill, Nolensville, Spring Hill, Dickson and surrounding Middle Tennessee communities.

Before the painting crew arrives

Your preparation
questions, answered.

Is a regular house wash enough before painting?

Sometimes it is the cleaning step a sound surface needs, but it is not automatically the whole preparation scope. Chalking, failing coatings, wood condition, repairs and the selected paint system may require additional work. Agree on the requirements with the painter before booking.

How long after washing can my painter start?

There is no universal waiting period. Material, weather, shade and the coating instructions affect drying. The painter should confirm the surface meets the coating requirements, including moisture conditions where relevant, before application.

Does paint prep cleaning include scraping, sanding or priming?

Not unless specifically included in the written proposal. This service centers on assessed cleaning and residue removal. Mechanical preparation, repairs, caulking, priming and painting remain with the coating contractor unless separately agreed.

Can you remove chalky oxidation before repainting?

We can assess chalking and surface residue and quote suitable cleaning or oxidation removal where appropriate. We do not assume a standard rinse removes every chalky deposit. The painter still needs to assess the remaining coating and confirm the preparation is suitable for the intended finish.

Can you prepare cedar or a stained deck?

We assess wood cleaning, stripping and brightening through our wood restoration service. Removing a failed stain and preparing painted wood are different scopes. Send photos and identify the current finish and planned coating when known.

Will you guarantee that the new paint will adhere?

We stand behind the cleaning scope we agree to perform, but we cannot guarantee another contractor’s coating application. Adhesion depends on the substrate, remaining coating, preparation beyond washing, product compatibility and application conditions.

Can painters hire you directly for multiple projects?

Yes. Send each site, material, paint-system preparation requirements and requested schedule. We can quote the cleaning portion and agree on handoff details with the contractor responsible for the coating work.

The standard behind the scope

Follow the coating requirements.

Sherwin-Williams describes a properly prepared surface as clean, solid and dry. Cleaning is one part of reaching that condition; the painter must address remaining defects and follow the selected coating’s instructions.

Homeowners & painting contractors

Get the cleaning
scope settled.

Tell us what is being painted, what needs to come off and when the painter is scheduled. We will review the requirements and confirm the next assessment step.

Free, itemized quotes · No obligation · 615-593-8069

Your project brief

  • Property address and building height
  • Wide photos and close-ups of problem areas
  • Existing finish and planned paint system, if known
  • Painter’s cleaning or preparation requirements
  • Target date, access and site contact